Table of Contents
Washing machine mold, which is typically found on the rubber gasket of front-loading machines, is a common household problem. This kind of mold is caused by neglecting to clean the machine and/or using it improperly. But don’t worry. In this article, you’re going to learn how to remove mold from washing machines.
Just because a washing machine cleans laundry, this doesn’t mean it cleans itself. Mold feeds on the moisture and detergent residue that the machine produces. With this in mind, here’s how to remove mold from washing machines and how to prevent it.
How to Remove Mold from Washing Machines
- First, create a mold removal solution. You can either use a
commercial mildew cleaner or make your own mixture. Here are several homemade
cleaners you can create:
- 2 cups water, ½ cup hydrogen peroxide, and ¼ cup lemon juice — hydrogen peroxide and lemon juice are effective cleaners that combat mold and inhibit its growth.
- 2 cups water, ¼ cup lemon juice, and ½ cup distilled white vinegar — white vinegar is an all-around cleaner that you can use as an alternative to hydrogen peroxide.
- 1-part vinegar and 4 parts water — just vinegar and water can do the trick if the mold growth in your washer gasket is in sparse amounts.
- 1-part bleach and 4 parts water — use bleach if the above-mentioned natural cleaners don’t work for you.
- Add your preferred cleaner into a spray bottle and mist the solution over the mold on the gasket. Put on rubber gloves to protect your hands and a dust mask to avoid inhaling mold spores. Then use a cloth or towel to clean the gasket thoroughly. For persistent spots, let the solution sit for a few minutes and use an old toothbrush.
- Once you’ve cleaned the rubber seal, it’s time to purify the drum and hoses. Run a cycle on the hottest setting with your preferred mold remover; doing this will rinse away any mold traces and odors from your washer drum and hoses.
- If a musty smell persists, there may be mold growing behind the washer drum. Call the manufacturer (if your machine is under warranty) or a qualified repair person. They can diagnose your washer and fix the mold problem.
Signs That Mold is Growing in Your Washing Machine | Remove Mold from Washing Machines
Mold in your washing machine often announces itself through unpleasant odors. If your laundry doesn’t smell fresh even after a wash, mold could be the culprit. You might also notice dark spots or residue around the rubber gasket of front-loading machines.
Hidden mold can be trickier to identify but may cause issues like unexplained allergies or mildew smells in your laundry room. Regular inspection of your washing machine’s drum, detergent drawer, and rubber seals is key to catching mold early.
How to Prevent Mold in Washing Machines | Remove Mold from Washing Machines
- Use only the right detergent. If you have a High-Efficiency (HE) washer, use High-Efficiency detergent. Non-HE detergent leaves behind too many suds that promote mold growth. Use only the recommended amount of detergent for the same reason.
- Leave the door open after each wash to allow moisture inside the machine to escape. Doing so prevents the formation of a damp environment in which mold can grow.
- Remove wet clothes immediately after a wash. Not only does this prevent moisture and mold buildup, but it also prevents your clothes from smelling musty.
- Wipe the door gasket with your mildew cleaner regularly. Do so at least once a week to eliminate moisture and detergent residue that promotes mold growth.
- Use a dehumidifier where you keep the washer if the area is humid. Humidity from outside the machine may contribute to the mold inside it, so make sure to fix the water or humidity problem. Set up a dehumidifier in the room.
Ann Arbor-Specific Tips for Managing Washing Machine Mold | Remove Mold from Washing Machines
Manage Humidity Levels:
In Ann Arbor’s humid summers, use a dehumidifier in your laundry area to keep moisture levels in check.
Winter Care:
During Michigan’s colder months, ensure proper ventilation in your laundry room to prevent condensation and mold growth.
Improve Ventilation:
Ann Arbor homeowners should consider installing proper ventilation systems or exhaust fans in laundry areas to reduce humidity and improve airflow.
For water damage restoration in Ann Arbor, contact the PuroClean of Ann Arbor
Mold in washing machines can pose health risks. Follow these tips to eliminate mold and prevent it from returning. Beyond mold growth, washing machines can experience other issues like overflowing. Learn what to do if your washing machine overflows and discover ways to prevent water damage from other appliances in your home.
Despite taking precautions, water damage from washing machines can still happen. When it does, PuroClean of Ann Arbor is here to help. For expert flood water damage repair and water removal services, contact us at (734) 926-5900. We’re ready to rescue your property and restore peace of mind
