mold-in attic
Mold Restoration, Water RestorationPublished September 18, 2020Last Updated October 2, 2020

How to Prevent Mold in Attic Spaces

The attic is one area of the home that is very likely to be neglected or ignored. Moisture can build up and create perfect conditions for mold growth. The roof may leak, ventilation may not be sufficient, or appliances, or exhaust fans, may blow hot moist air into the attic. These are some of the most common causes of excessive attic moisture and mold growth. However, with proper care, you can help prevent the growth of mold in attic spaces.

During winter months, microbial issues can often form in the attics of homes due to a lack of proper ventilation or condensation-related problems from high relative humidity and cold surfaces.  Some have installed insulation in soffit vents, which can be a leading factor for microbial growth, as the insulation reduces airflow in the attic, allowing moisture to build up. 

Any mold that’s left unchecked in your home attic space can reproduce, leading to potential structural deterioration of the roof’s plywood sheeting and other structural elements.  Here are a few tips on how to maintain a mold-free attic:

Tips to maintain a mold-free attic

  • Check regularly for roof leaks that may produce moisture. Inspect the insulation and wood for discoloration, as this may be a sign of water damage. Check areas where two roofs join at an angle – this area is prone to cracks and leaks. The area around plumbing stacks may also suffer from water intrusion.
  • Ensure proper ventilation. The moisture levels in your attic increase without adequate ventilation. This is particularly important in winter, when warm air rises to the ceiling, enters the attic, and condenses on the cold surfaces. It’s vital to have reasonable ventilation so that moisture can escape. Finally, make sure your vents are not covered by insulation. There are many ways to improve attic ventilation, so be sure to consult a specialist.
  • Ensure adequate insulation. Attic insulation controls the temperature and moisture levels in the attic. In winter, the temperature in the space should actually be at or near the outside air temperature. Have the attic floor adequately insulated to minimize the air transfer between the main living area and the attic space. Ensure that the insulation of the other regions and surfaces into the attic, such as those of heating ducts, are also in good shape.
  • Vent appliances directly to the outside. Your dryer, kitchen, and bathroom vents should always blow the air to the outside and not into the attic. Otherwise, your ventilation system could become overwhelmed and may not be able to eliminate the resulting moisture efficiently.

For mold remediation services, call PuroClean

As we move into the colder months of autumn and winter, remember that mold growth is still common. PuroClean is IICRC certified and offers professional commercial and residential mold remediation services. So, whether you need mold cleanup or water damage restoration, don’t hesitate to contact your local PuroClean office.

Contact Your Local Office

24/7 Emergency Response 800-775-7876