Mold continues to be in the news, somewhere in the nation, on a daily basis. Mold spores are, literally, everywhere and usually cause no concern. However, when the conditions are right, mold can begin to grow, and if that occurs inside of a home or other structure, it is always a concern and can be a real problem. The molds that cause problems in homes need just three things to grow:
Food – Anything that used to be alive (wood, cardboard, paper, wool, silk, leather, etc.). Temperature – These molds thrive in the range of 68°F to 86°F (the same range we typically keep our homes).
Water – Very little is needed. In fact, the Environmental Protection Agency (EPA) indicates that indoor humidity above 60% is sufficient to allow mold to develop.
Since our homes normally contain a lot of potential mold “food,” and are normally kept at a temperature conducive to mold growth, all that is missing is water. Water is also the most likely cause of damage to property across the nation. It includes everything from overflowing sinks, to leaky or broken pipes/hoses, to drain or sewer back-ups, to over-ground water from heavy rains or river/coastal flooding. If the water is in contact with any form of dirt (remember, flood waters certainly contain lots of “dirt”), then the growth can occur even more quickly since dirt always includes organic material – “mold food.”
In all cases, water damage must be remediated quickly and thoroughly or it will result in mold growth. Complete drying, back to normal conditions, is very important since any excess moisture will result in mold growth.
Mold is often seen as obvious “growth” or even “discoloration” on materials like paper or wood. Colors can range from white to orange and from green to brown and black, and it gives off the well-known “musty/moldy” smell.
According to the Center for Disease Control (CDC),” The Institute of Medicine (IOM) found there was sufficient evidence to link indoor exposure to mold with upper respiratory tract symptoms, coughing, and wheezing in otherwise healthy people. The IOM also found limited or suggestive evidence linking indoor mold exposure and respiratory illness in otherwise healthy children.”
The CDC recommends that all molds found in the indoor environment be eliminated, adding, “Generally, it is not necessary to identify the species of mold growing in a residence, and the CDC does not recommend routine sampling for molds.” Since all molds have the potential to cause allergic or allergiclike symptoms in people, especially highly susceptible individuals, they should be eliminated whenever they are found. Knowing the name of the mold does not change anything since the same safety precautions should be used whenever remediating mold, regardless of the “name.”
Mold Prevention Tips
There is no practical way to eliminate all of the mold spores in an indoor environment. But there are many ways to help control moisture and mold growth in your home. The basic rule is: if you can see or smell mold, take steps to eliminate the excess moisture, and to clean and remove any mold. It is very important to quickly identify and correct any moisture sources before health problems develop.
Stop The Water
Fix leaks in pipes and any damp area around tubs and sinks so mold spores don’t have a growing environment.
If you rebuild or remodel, do so with waterresistant building materials such as tile, stone, deep-sealed concrete, waterproof wallboard, water-resistant glues, etc.
Prevent seepage of water from the outdoors into your house. It’s important to have rainwater from gutters or the roof drain away from the house. The ground around the house needs to slope away to keep the basement and crawl space dry.
Ventilate any crawl space as much as possible to allow for thorough drying. Keep It Dry
Reduce the moisture in the air with dehumidifiers, fans and open windows or air conditioners, especially in hot weather. Do NOT use fans if mold may already exist; a fan will spread the mold spores.
Try to keep the humidity in your home below 40%.
In moisture-prone areas, consider easy-toclean, water-resistant floor coverings, such as vinyl or stone tile.
Reduce potential for condensation on cold surfaces by insulating. Dealing With Mold
If you discover mold, the first step is to find and eliminate the water source, as above.
Then, if it is a small area (less than about 10 sq ft), and you feel comfortable, clean the mold with a detergent solution and thoroughly dry all materials.
If it is larger than 10 sq ft, consider calling a professional mold remediation company, such as PuroClean, the Paramedics of Property Damage™. Their well-trained, professional technicians understand and apply industry standard approaches to remediate mold completely, while being as safe for your home and your family as possible.
Regardless of the circumstances – dealing with mold, water damage, fire/smoke damage, or biohazard remediation – call your local PuroClean office, the Paramedics of Property Damage™. For all property damage situations, these professionals are standing by. They will mitigate the loss to prevent further damage and will then provide restoration services to return the property to a pre-loss condition as quickly as possible. All PuroClean offices have well-trained professional technicians who provide the latest state-of-the-science services to all property damaged from water, fire, smoke, mold, and other disasters.