PuroClean Mold Remediation Services


Mold can develop when materials are allowed to remain wet for extended periods of time. There are a variety of reasons the moisture intrusion can happen including but not limited to:

  • Construction defects
  • Plumbing failures
  • Appliance water line or drain line breaks
  • Improper maintenance
  • Weather-related issues including storms and hurricanes

When mold damage is discovered in your home or business, the most critical course of action is to have it remediated as quickly as possible and ensure structural materials remaining are dried as quickly as possible.

PuroClean’s IICRC certified technicians follow industry standards to remediate mold that has infected and or damaged property the right way. Our goal is to return your home or business to a pre-loss condition by taking the following steps.

  1. Establish a scope of remediation and repair by thoroughly inspecting the affected area/s.
  2. Implement engineering controls and containment to prevent cross-contamination of unaffected areas of the building by utilizing negative pressures with HEPA (High Efficiency Particulate Air) air filtration devices.
  3. Develop a remediation protocol to remove contaminates by:
    • Removing compromised materials and contents per industry standards.
    • Thoroughly clean the air by using HEPA air filters devices and HEPA vacuums.
    • Thoroughly clean all surfaces with cleaning solutions that may include EPA (Environmental Protection Agency) registered disinfectants, followed HEPA vacuuming all surfaces again. Once remediation is complete, it is recommended to have a Certified Industrial Hygienist complete a 3rd part clearance test to ensure the building is safe for occupancy. A good source to find a CIH is through ACGIH.org website.

We can provide a complete estimate, including photos, to the agent or adjuster within 24-48 hours. Our commitment to excellence means that you can expect effective, ongoing communication and reporting from us.

Each independently owned and operated PuroClean franchise works with indoor environmental professionals (IEPs) and laboratories in an effort to protect you and your family from potentially dangerous mold situations. PuroClean professionals are trained, IICRC certified, ready to mitigate mold losses and meet every challenge with professionalism, reliability, compassion, and respect.

Most Common Reasons For Mold Removal In Your Property


Construction Defects

Construction defects compromise a property’s structural integrity and create the perfect conditions for mold, necessitating mold remediation. A poorly constructed or sealed building can lead to excessive moisture and water leakage, creating an ideal environment for mold to flourish. Cracks in the foundation, incorrectly installed windows, inadequate insulation, and insufficient ventilation can all contribute to water intrusion, enabling mold growth.

Plumbing Failures

Plumbing failures, like leaks or blockages, lead to mold growth in a property. When water from these issues seeps into walls or floors, it creates a perfect environment for mold to thrive. When airborne mold spores collide with the excess moisture, it can result in mold colonies. If plumbing problems are not addressed promptly, mold will take hold and require professional mold remediation.

Appliance Failures

Malfunctioning appliances, like leaky dishwashers or water heaters, ice maker and washing machine water supply lines, can lead to mold growth on a property. When water seeps into hidden, poorly lit surfaces, such as behind walls, it creates the perfect conditions for mold to develop. That’s why timely maintenance and inspections of your appliances are critical, as their failure can quickly cause mold growth that requires mold remediation services.

Improper Property Maintenance

Neglecting property maintenance can lead to mold growth. Ignoring leaks, plumbing issues, poor ventilation, or roof drainage concerns can not only lead to mold proliferation, but also be uninsurable. Not performing regular routine maintenance can be a primary reason for insurance companies to deny a claim related to water intrusion.


Our list of continuing education courses for insurance agents offered across the country is constantly being updated. Make sure to sign up to get notified of new CEs, industry events and more.
Outstanding Service
Tamarac

Latest Mold Removal and Remediation Blogs

Other Reasons for Mold Removal and Remediation in Your Property

Roof Leaks

Roof leaks can cause water to infiltrate your property, potentially causing mold to grow in your home or business. Often, the water will seep into an attic or dark crevice of your roof, enabling mold growth. If the problem is not detected in time, mold can spread, causing structural damage. Mold damage caused by roof leaks requires immediate attention.

Weather-Related Incidents

Heavy rains, flooding, or excessive moisture caused by storms can create a breeding ground for mold. When water infiltrates homes or buildings, particularly in places where it shouldn’t linger, it sets the stage for mold spores to thrive and multiply. Even after the storm subsides, the moisture in walls, floors, and other structural elements can initiate a silent but potentially damaging mold invasion. Prompt action is necessary to remediate the mold.

Excessive Humidity

Excessive humidity is the ultimate breeding ground for mold growth. When humidity levels exceed 60% RH or higher, especially in enclosed spaces, the air becomes saturated with moisture and result in conditions that can allow mold growth. Areas like bathrooms, basements, crawlspaces, or poorly ventilated rooms are particularly susceptible. High humidity also inhibits proper drying, allowing mold to spread further.

Mold FAQs

How do I prevent mold growth in my home?

The key to preventing mold growth is moisture control. There are many ways to achieve this including repairing leaks in your home—from walls, roof, gutters, plumbing pipes, etc., keeping indoor h[…]

How do I prevent mold in my bathroom?

The biggest step is to be sure the bathroom has adequate ventilation. It is important to have a properly installed exhaust fan.[…]

What are the symptoms of mold exposure?

The symptoms normally resemble “allergies:” itchy eyes, sneezing, coughing, etc. However, different molds will affect different people in different ways. If you believe you might be suf[…]

How do I know if it’s black mold?

The only way to be able to name mold is to have a sample tested at a qualified laboratory.[…]

Can mold grow on concrete floors?

Not usually. Mold will not grow without a lot of moisture, so keeping your concrete floors clean and dry should prevent mold growth.[…]

Why choose PuroClean for your water damage restoration needs?

Trusted

We have earned the trust of homeowners, insurance professionals, home service providers, and property managers throughout North America.

State-of-the-art Equipment

We use a range of modern, high-quality equipment that work together to create the most effective drying conditions.

Ongoing Communication

At every step, we keep you and your insurance agent informed. We want everyone involved to understand what is happening, what to expect, and what to do.

Thorough Cleanup

We treat water-damaged property as if it were our own. Our technicians dry every item respectfully and professionally, from your carpet to your family photographs.

Unlike any other water damage repair company, we rescue and restore lives and property with the PuroClean QuickDry System™ in the shortest possible time and at a much lower cost than the traditional drying systems or unnecessary removal of affected materials that can be dried that some competitors resort to. Using state-of-the-art equipment for drying, dehumidifying, deodorizing, and disinfecting, we restore your home or business with minimal disruption so that you can get back to your normal life.

PuroClean Emergency Mold Removal Services

  • Mold remediation

  • Structural demolition

  • Contents removal

  • Odor removal

  • Furniture restoration

  • HEPA vacuuming

  • Anti-microbial spraying

  • Reconstruction

Urgency and sensitivity

We understand the distressing impact that mold growth can have on residential and commercial properties. As the “Paramedics of Property Damage™,” we are at your service 24/7, prepared to salvage your property professionally. We remediate your home or business with compassion and minimal disruption to your daily life.

Detailed and Accurate Assessments

Our professionals use advanced equipment such as moisture meters and infrared cameras to identify the full extent of moisture intrusion that can lead to mold growth. We then guide you through the restoration process, keeping you informed every step of the way to ensure you feel safe and confident as we eliminate all traces of mold from your property.