Are there water stains on your ceiling, and the paint is peeling off? If so, it’s a sign that you have a water-damaged ceiling, and you may be asking yourself “what should I do?”.
- Stop the Water Source
- Dry Out a Wet Ceiling
- Remove the Damaged Selections
- Repair the Water Damaged Ceiling
- Prime and Paint the Ceiling
- Discover What To Do if You Have a Water Damaged Ceiling Today
Water leaks from the roof or burst pipes cause yellowish-brown stains on your ceiling. But if the leak is a major one, your ceiling might develop cracks or even crumble entirely. For this reason, you should treat a water-damaged ceiling as an emergency to be addressed immediately.
Otherwise, your ceiling will be a good habitat for mold growth, putting your family at risk of developing mold-related illnesses. Besides, if water damage issues are not addressed early, you might be forced to incur costly repairs in the future.
When fixing a water-damaged ceiling, you need to be cautious. A slight mistake might make matters worse.
So, what is the right thing to do when you notice water damage is at play? If you have no idea, worry no more.
Here is a comprehensive guide on what to do if you have a water-damaged ceiling.
Stop the Water Source
Before addressing water damage issues, you must stop the water source. If you go ahead to replace the ceiling without addressing the source, it shall be a waste of your money and time.
To locate the source, you will have to remove the damaged part of your ceiling. The source might be just above the damaged area, or the water might have spread from other areas. In some cases, the water might be from multiple sources.
Thus, when searching for the water source, ensure to identify all of them. After identifying all sources, carry out any repairs and replacements needed to stop the source.
But if the water source is a damaged roof or serious issues with your plumbing system, involve an expert. Otherwise, DIY repairs in such a case might just make matters worse.
Dry Out a Wet Ceiling
You can dry out the wet ceiling for a minor water damage ceiling. But before you start drying your ceiling, ensure to get rid of dust and debris available.
To dry out your ceiling, you can use a dry piece of cloth. But if the water seems to have penetrated further, you can use a fan. The regular fans you use at home will work in most cases, but they may take a long time to dry the ceiling.
It would be best to use high-volume fans alongside a structural drying dehumidifier. This will help you get the wet ceiling dry within a few hours. Ensure to aim the fan towards the ceiling and have the dehumidifier underneath the wet areas.
But how do you determine when your ceiling is dry? Well, don’t rely on your eyes; they will mislead you. Use a moisture meter to ensure the ceiling is completely dry.
Remove the Damaged Sections
After drying your ceiling, you need to eliminate any peelings or bulging areas. But when working on the damaged areas, you need to be cautious; the peelings and exposed nails could injure you.
It’s therefore important you wear protective gear such as a safety mask and hand gloves. After you are guaranteed your safety, go ahead and scrape off the peeling or bulging areas. Ensure to remove areas that have been damaged by water completely.
You can cut the damaged sections into rectangular or square shapes using a keyhole. Rectangular or square holes on your ceiling are easy to replace accurately.
Otherwise, if you cut the damaged areas into irregular shapes, it will be challenging to get a perfect replacement. But to have the removal and replacement of damaged areas handled professionally involves a water damage restoration company.
Repair the Water Damaged Ceiling
After drying the ceiling out and getting rid of the ceiling peels, you should have it repaired. Using sandpaper, you can start by smoothening any ridges, bumps, and rough sections on your ceiling.
If there are any small holes on the ceiling, fill them with a joint compound and dry it. After drying, use more sandpaper to eliminate any joint compound that might have overspilt.
For the areas you had cut the drywall before, ensure to have them fixed. Start by measuring the size of the holes to determine the size of drywall needed.
It’s paramount that you cut drywall two inches bigger than the hole and size it down using a utility knife. This will help you avoid cutting drywall that won’t fit perfectly into the hole. After sizing the drywall, perfectly stick it in the hole using an adhesive and leave it to dry.
Once the adhesive has dried, add a layer of joint and use sandpaper to smoothen it down. But if you are busy or don’t know how to handle water-damaged ceiling repairs, consider hiring water damage restoration services.
You must hire a licensed and reputable water damage restoration company. Ensure to read online reviews, especially from third-party sites such as Better Business Bureau. Such reviews are reliable and will give you information about the competency of the water damage restoration company.
Prime and Paint the Ceiling
After completing the repairs, you should prepare for priming and painting by opening all windows. This will allow proper ventilation essential for the priming and painting process.
Start by applying primer to the ceiling and leave it to dry. Once dry, you can go ahead to repaint the ceiling with the paint color of your choice.
Discover What To Do if You Have a Water Damaged Ceiling Today
If the water-damaged ceiling is not repaired on time, you risk facing mold growth menace and costly repairs in the future. With the right tips and knowledge, fixing your water-damaged ceiling becomes easy.
Are you looking for water damage restoration services in Allen, TX, and the surrounding areas? At Puroclean Restoration Specialists, we got you covered.
We provide emergency water, fire, and biohazard cleanup and restoration to commercial and residential clients. Our experienced technicians are available round the clock to respond to your needs.
Contact PuroClean Restoration Specialists today for all your water damage restoration needs.