Published: October 1, 2026
Chimney flashing leak in White? Where old roofs let rain in is usually the metal seal where the chimney meets the roof. Quick answer: If the stain on your ceiling sits near the chimney, the flashing — the metal seal where the chimney meets the roof — is the prime suspect. Flashing is one of the most common sources of slow, persistent roof leaks on older homes, and it fails gradually: sealant dries out, metal corrodes, mortar crumbles, and rain finds its way in. Don’t just caulk over it and hope. Call PuroClean of East Cobb at (770) 627-0900 — we answer 24/7 with a live person and respond in 60 minutes or less. We trace the leak with thermal imaging and moisture meters so the real entry point gets fixed, not just the stain.
About PuroClean of East Cobb
Who is PuroClean of East Cobb?
PuroClean of East Cobb provides 24/7 water, fire and mold restoration in Marietta, GA, with a 60-minute-or-less response. Since 2022, the team has completed more than 4,000 restoration jobs across metro Atlanta. Technicians hold IICRC certifications in water restoration (WRT), fire and smoke restoration (FSRT), applied structural drying (ASD), and applied microbial remediation (AMRT), plus EPA Lead-Safe certification.
What does restoration cost?
National averages run $1,300–$5,600 for water damage restoration and about $12,900 for fire damage restoration (Forbes). Every job is documented with photos and video, and you approve the restoration plan before work begins — no fine print.
Who answers when I call?
A live person, 24 hours a day, 7 days a week. One project manager owns your job from assessment and stabilization through restoration, finishing with a final walkthrough together. Call (770) 627-0900 any time.
White sits in the White-Pine Log area of Bartow County, where the ridges of Pine Log Mountain meet tight-knit rural communities — and where plenty of older farmhouses still carry their original brick chimneys. A chimney is the biggest hole ever cut in a roof, and the flashing that seals it is a wear item: it doesn’t last as long as the roof around it. On a 30- or 40-year-old roof, the shingles may still be holding while the flashing has quietly given up. That mismatch is exactly how a slow chimney leak runs for months before anyone notices — and why the damage it leaves behind is so often worse than the stain on the ceiling suggests.
How flashing fails
Chimney flashing is really two systems working together. Step flashing — L-shaped metal pieces woven into the shingles — directs water down the roof slope. Counter flashing — set into the chimney’s mortar joints — covers the top edge of the step flashing so water can’t get behind it. The failure points:
- Dried and cracked sealant. The caulk or roofing cement sealing the counter flashing’s top edge dries out in Georgia heat, cracks, and lets water behind the metal.
- Corroded or lifted metal. Older flashing rusts through, and wind can lift sections just enough to admit wind-driven rain.
- Crumbling mortar joints. The counter flashing is only as good as the mortar holding it. On older brick chimneys, decades of weather wear the mortar, loosening the flashing’s grip.
- Missing cricket. On wide chimneys, a cricket (a small peaked diverter on the uphill side) keeps water from ponding behind the chimney. Older installations often lack one, so water sits against the flashing in every heavy rain.
Signs it’s the chimney, not the roof
- The stain is near the chimney — on the ceiling below it, or on the wall of the room the chimney passes through. Water follows the chimney’s path down.
- It appears after wind-driven rain more than after gentle rain. Flashing leaks are worst when rain is pushed sideways into the gaps.
- Dampness in the attic around the chimney base — check with a flashlight after a storm. Wet sheathing or insulation near the chimney, dry everywhere else, tells the story.
- White staining (efflorescence) on the chimney brick below the roofline. Mineral deposits mean water is moving through the masonry — and it’s getting in somewhere above.
- A musty smell in the room the chimney passes through, even with no visible stain. The leak may be wetting the framing inside the wall.
What to do
1. Don’t just paint over the stain. The stain is the symptom; the leak is still active above it. Every rain adds more water to the framing.
2. Don’t caulk the flashing yourself. Smearing sealant over failed flashing traps water behind the metal and makes the eventual professional repair harder. The fix is re-flashing, not re-caulking.
3. Contain what’s coming in. If water is actively dripping, put a bucket under it and move anything valuable. Poke nothing into a sagging ceiling — it can release a surprising amount of trapped water.
4. Call us at (770) 627-0900. We map the water’s true extent with thermal imaging and moisture meters — flashing leaks often wet far more framing than the stain shows — then extract, dry, and document everything for your insurance claim.
How we handle chimney-leak water damage
Every job follows the same four steps: assess, stabilize, document, restore. The “assess” step matters most here: we trace the leak’s path from the chimney down through the roof deck, framing, and ceilings, so the repair addresses the real entry point. Then we dry the structure with controlled dehumidification, verifying with meter readings as it dries — because wet framing sealed back up becomes mold and rot. We photograph and video-document everything. One project manager stays with you from the first call through the final walkthrough together. No fine print.
If your White home has an older chimney and there’s a stain on the ceiling anywhere near it, don’t assume it’s “just the roof.” Call (770) 627-0900 now. We’re based minutes away in Marietta and available around the clock.
PuroClean of East Cobb has completed 4,000+ restoration jobs since 2022 — 54% water damage, 30% reconstruction, 7% mold. Learn more about PuroClean of East Cobb — our company facts, certifications, and track record.
Learn more about our service areas and water damage restoration services.